TFR Direct 5000 is a high-quality, ready-to-use traffic film remover made for powerful cleaning. It is designed to remove heavy dirt, grease, grime, and road film without needing to mix it with water. This saves time and effort during cleaning.

TFR Direct 5000 provides strong cleaning power and can be used with pressure washers, foam machines, or by hand. It is suitable for cleaning vehicles, machinery, and other surfaces, helping to remove tough dirt quickly and easily.

• Application:
• Use undiluted for maximum cleaning power or dilute as needed depending on the level of soiling.
• Apply evenly using a pressure washer, foam lance, or spray system.
• Dwell Time:
• Allow the product to sit for 1–2 minutes to penetrate and lift dirt and grime.
• Do not allow the product to dry on the surface.
• Rinsing: Rinse thoroughly with clean water using a pressure washer or hose.
• Dilution Guidelines:
• For high-pressure washers: Set the chemical regulator between 1–2% or dilute 1 part to 200 parts water.
• For manual washing: Dilute 1 part to 100 parts water and rinse thoroughly.
• Adjust detergent flow as needed for optimal cleaning results.
• Hold the lance approximately 150mm from the surface and move steadily for even cleaning.

• Ready-to-Use Formula: No dilution required—ideal for quick and easy application.
• Powerful Cleaning Action: Removes stubborn traffic film, dirt, and grime effortlessly.
• Time-Saving Solution: Instant application eliminates the need for mixing.
• Versatile Use: Perfect for vehicles, machinery, and industrial surfaces.
• Foaming Capability: Works effectively with foam lances for visible cleaning action.
• Professional Grade: Designed for haulage, valeting, and workshops.

Q1: Does TFR Direct need to be diluted before use?
A: No, TFR Direct is a ready-to-use formula, eliminating the need for dilution.

Q2: Can I use TFR Direct with a foam lance?
A: Yes, TFR Direct works exceptionally well with foaming units for visible and thorough cleaning.

Q3: Is TFR Direct suitable for all vehicle surfaces?
A: Yes, it is safe for most surfaces, but avoid prolonged contact on sensitive paintwork.

Q4: How long should I leave TFR Direct on a surface before rinsing?
A: Allow it to dwell for 1–2 minutes but do not let it dry on the surface.

Q5: Can TFR Direct be used for manual cleaning?
A: Absolutely! TFR Direct can be applied using spray systems, brushes, or foam applicators.